Acres Per Hour Calculator

Enter your implement width, travel speed, and field efficiency to calculate how many acres you can cover per hour.

80%

14.5

acres per hour

5.9

hectares per hour

At 30 ft wide and 5 mph with 80% efficiency:

  • • 14.5 acres/hour (5.9 ha/hour)
  • • 116 acres in an 8-hour day
  • • 4.1 minutes per acre

How It Works

The formula is: Acres/Hour = (Width (ft) x Speed (mph) x Efficiency) / 8.25

The constant 8.25 converts feet and miles per hour into acres per hour. Field efficiency accounts for turning time, overlaps, and stops, typically 70-85% for most operations.

Typical Field Efficiency by Operation

OperationEfficiencyWhy
Spraying80-85%Fewer turns, wider booms
Plowing70-80%Slower turns, soil conditions
Seeding65-75%Refilling, calibration stops
Harvesting60-75%Unloading, yield variability

Example: How Long Will the Job Take?

A 40 ft implement at 5 mph with 80% efficiency covers (40 x 5 x 0.80) / 8.25 = 19.4 acres per hour. A 160 acre field then takes 160 / 19.4 = 8.25 hours of field time. Add travel between fields and refill trips on top of that when you plan the day.

The table below runs the formula for common implements at typical working speeds. Use it as a starting point and enter your own width and speed in the calculator above.

ImplementWidthSpeedEfficiencyAcres/hour
Sprayer boom90 ft10 mph80%87.3
Sprayer boom60 ft8 mph80%46.5
Grain drill30 ft6 mph70%15.3
Planter (12-row, 30 in)30 ft5 mph70%12.7
Disc harrow20 ft6 mph80%11.6
Moldboard plow10 ft5 mph75%4.5

Overlap eats into these numbers directly: driving 10% of every pass over ground already covered cuts real capacity by the same 10%. See how to reduce overlap for ways to win it back.

Track Real Acres Per Hour

FieldMate calculates your actual acres per hour in real time using GPS. See speed, covered area, and elapsed time as you drive.

Try FieldMate Free

FAQ

How do you calculate acres per hour?

Use the formula: (Width in feet x Speed in mph x Efficiency) / 8.25. For example, a 40-foot implement at 5 mph with 80% efficiency covers 19.4 acres per hour.

What is field efficiency?

Field efficiency is the percentage of time actually spent working vs. total time in the field. It accounts for turns, overlap, refilling, and stops. Typical values range from 60-85% depending on the operation.

What speed should I use for the calculation?

Use your average working speed, not top speed. For spraying this is typically 8-12 mph, plowing 4-6 mph, and seeding 5-8 mph. GPS apps like FieldMate show your real-time speed.

Why is the constant 8.25 used?

The constant 8.25 converts feet and miles per hour into acres per hour. It comes from: 1 acre = 43,560 sq ft, and 1 mph = 5,280 ft/hr. So 43,560 / 5,280 = 8.25.

Related Tools

Tractor GPS Field Navigator
Straight guidance lines on every pass
Get